I just moved to 2nd and Swain. The corner needs a stop sign for all ways, not just for traffic on Swain. Most of the intersections along 2nd have 4-way stops; this intersection is the exception for some reason. Drivers go way faster than the 25mph allowed; the area is quite congested with students moving back into the area.
Please add more one way signs on W 3rd from Jackson to Walker. Too many people are using this as a two-way street.
This is a bustling intersection and should have a stop sign. I've seen near misses multiple times, and it's in an area where children are walking and riding their bikes. Thanks for listening and your consideration.
The intersection of 11 and Forrest currently is a three way stop. I would prefer if this was a 4 way stop. I frequently travel between the buildings on the NE and the SW corners. It would also be helpful to have stop-lines/cross walk lines once construction is finished in the SE block.
I frequently travel N and S on Hunter, and it is very, very difficult because of street parking to see whether there is oncoming traffic at this Woodlawn intersection. (There are other similar situations in the neighborhood, but this one is particularly bad.) it would be wonderful if there were convex traffic mirrors to be able to see around the corner. These are commonly used in low-visibility corners in Europe, and can be highly effective.
The intersection at north 10th, Smith road, and Russell road is one of the most dangerous in Bloomington. I believe there needs to be a traffic light there to allow people to turn from Smith Road. It's almost impossible for drivers coming off Smith Road to turn either right or left onto 10th or Russell, especially during rush hour traffic. Visibility is poor because 10th street curves in unusual ways at that intersection, and none of the two-way traffic wants to yield. Bus traffic from 10th Street compounds the problem. Thanks for helping!!
The intersection of Smith road and 10th Street has heavy traffic, especially in the morning and during the rush hour. The fact that there is university elementary school nearby the intersection makes the traffic heavier at times. However, the intersection is controlled only by one way stop sign. The fact that around the intersection the road on the 10th Street curves makes the traffic coming from Smith road challenging to turn on the 10th street. I strongly recommend putting traffic lights on that intersection to avoid accidents and relax the traffic around the intersection.
I would like this intersection to be "No Turn On Red" for northbound traffic, and possibly have a few seconds delay for pedestrians/bikes to cross before the light turns green. It's dangerous to have cars hooking around bikers in the bike lane trying to go straight across. Thanks!
Looked like E Morningside through Park Ridge is at 20 mph but Park Ridge East is at 25 mph. Can you make consistently 20 throughout? Thank you. Both remain residential areas, bike path, and such.
Please consider adding a stop sign at the intersection of Highland and the street leading into/out of the YMCA property. Curving road, ascending and descending roads, blocked views, speeding cars, pedestrians and children. Need a safer way to cross and turn at this intersection. Thank you