Case Date:

9/9/2023

The pedestrian light to cross third street often doesn't work and it becomes impossible to cross the street at the intersection.

Case Date:

9/9/2023

Hello- Car blocking the bike lane on washington just north of 1st st at 6:14pm Sat 9/9/23. A little blurry, but plate # 889BYN Thanks!

Case Date:

9/14/2023

To Whom It May Concern, this is more of a recommendation than an problem. The pedestrian/bike crossing light on Allen St across Walnut is generally pretty good. Currently, there is a button to activate the lights on the sidewalks and wanted to suggest installing an additional button curbside for bikers. As it's currently constructed the median has two cut-outs so bicyclists can stay in the road (which is where we should be), but activating the light requires we ride up on the sidewalk. Most bikers, myself included, just keep an eye on the road to cross once traffic passes rather than hop the curb to activate the crossing light. The problem arises when a driver decides to yield; it's a nice gesture, but with two lanes of traffic in both directions it isn't safe to cross unless drivers in both lanes decide to yield and it's difficult to see over the stopped car to make sure the second lane is clear. I tend to wave the driver who has yielded to indicate they should just keep going, Bloomington drivers being Bloomington drivers they defer to being polite. A button positioned for bicyclists would make it clearer to both drivers and cyclists when it is safe to cross. This crossing point gets a fair amount of pedestrian and cycle traffic, but I don't think it is enough for a button to disrupt car flow on Walnut.

Case Date:

9/16/2023

Kinser Pike road and sidewalks have been destroyed for a long time now after the construction at 17th and Kinser. These should have been repaired right after the gas line construction. Do bad this isn't the Eastside or IU as you all would've had it repaired the next day

Case Date:

8/23/2019

Gravel piled up on the multi-use path going East-West on 2nd/Bloomfield. There are a couple spots, the biggest and most slippery is right by the “Performance Auto” sign, just west of the pharmacy. There are a couple more spots that have much thicker gravel west of this spot, most notably in an area where there is a gravel drive. Perhaps that driveway needs to have a bump where the gravel meets the pavement to help prevent so much from falling into the path. Some pieces have been flung out into the street from under my bike wheels and the fine gravel by the Performance sign is slippery on a bike. That spot might need some raised brick landscaping on the edge to prevent it from sliding onto the path. No photos because it’s usually dark when i ride to twin lakes and i don’t think to stop and take a photo on the way back.

Case Date:

8/26/2019

The Highland-Hawthorne Bike greenway crosses Hillside Drive at Weatherstone/Olive. This crossing can be difficult and somewhat dangerous, as traffic on Hillside often seems to traveling quite fast, and can be quite busy at certain times of the day. Could the city look into placing a button activated crossing here, much like the one for crossing Walnut at Allen? This could go a long way towards making this crossing a bit safer for families trying to utilize the greenway to access Bryan Park.

Case Date:

8/30/2019

Renwick trail is very overgrown, two way travel is unsafe

Case Date:

9/1/2019

Would it be possible to get crosswalk lines painted on N. Oolitic Dr at West 11th St.?

Case Date:

9/3/2019

The cross walk signal is missing at kinser pike and 46 crossing from the north side

Case Date:

9/7/2019

Bike rack has been broken at this location for months. It just needs remastered to the concrete.