closed #179347
Traffic Signals
4CWG+C6 Bloomington, IN, USA
- Case Date:
- 3/25/2022
Stoplight flashing.
Stoplight flashing.
Signal needs reset/repaired, it is flashing red in all directions
The green street sign at 9th and Woodlawn is leaning towards the sidewalk. Thanks Jill.
The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.
10th and Jordan intersection: Westbound pedestrian crossing button on SE corner and northbound crossing button on SW corner are not working - red light above button remains on and walk signal is not activated. Problem has been happening for at least a week or so.
Union and 10th - north bound left turn light from union never triggered until car pulled up in right northbound lane.
The pedestrian walk signal on the north side of Kinser and the bypass has been smashed. Since the signal can't be activated, the green light is too short for a pedestrian to cross the bypass from the north side before the light changes. Given that many people cross there going from the Kroger carrying groceries, this is a hazard.
A yellow Watch for Pedestrian sign (and whole pole) was hit and knocked down and is now laying on ground. It's in the westbound lane on Country Club Road, right before the bridge over the creek (a little past the shopping mall with Lucky's Market).
The light at Patterson and 3rd doesn’t seem to be working.