The pedestrian signal on the northwest corner at the intersection of College and Kirkwoid does not show the white ok to cross figure when approaching from the east. I noticed this last weekend but forgot to report.
The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.
10th and Jordan intersection: Westbound pedestrian crossing button on SE corner and northbound crossing button on SW corner are not working - red light above button remains on and walk signal is not activated. Problem has been happening for at least a week or so.
The green street sign at 9th and Woodlawn is leaning towards the sidewalk. Thanks Jill.
Signal needs reset/repaired, it is flashing red in all directions
Crosswalk button closest to the old hospital (grass lot) is extremely hard to push and most times does not work when you push it. I’m not sure if it needs to get adjusted but I constantly have to cross without using it.
Stoplight flashing.
The flashing yellow arrow and the steady clearance arrow are kn each other's position northbound Patterson at 2nd. The order of signal displays should be with the most permissive at the bottom and the most restrictive at the top.
The new ped x-walk near Smith Rd and Hwy 45 seems to go off when no one is around. also, from clear to blinking red means about to turn red. but once red, it then goes to blinking red. what does that mean? can i do then, or do i need to wait until the blinking stops. signage is unclear on the meaning of the signals.