The Fire Code requires address numbers but only inspects Class I structures and not One and Two family Structures. If this is a rental property a complaint inspection can be scheduled to verify address numbers. If this is an owner occupied structure the there is no enforcement available except possibly the Post Office

IFC 505.1 Address identification. New and existing buildings shall have approved address numbers, building numbers or approved building identification placed in a position that is plainly legible and visible from the street or road fronting the property. These numbers shall contrast with their back-ground. Address numbers shall be provided in additional approved locations to facilitate emergency response. Address numbers shall be Arabic numbers or alphabetical letters. Numbers shall be a mini-mum of 4 inches (101.6 mm) high with a minimum stroke width of 0.5 inch (12.7 mm). Where access is by means of a private road and the building cannot be viewed from the public way, a monument, pole or other sign or means shall be Exception: Secured sites manned with on site, full-time 24 hour response teams who escort responding fire departments may omit address numbers, building numbers or building identification on individual buildings.

I can not find a requirement for Owner Occupied Residences to have addresses posted. Does the Fire Department have any requirements?

Hi Jeremy, I think this is a HAND issue? Thanks, Gretchen