closed #139452
Traffic Signals
600-610 Atwater Avenue
- Case Date:
- 7/23/2014
The walk signal to cross from the SW corner to the NW corner of Atwater and Henderson is not turning on.
The walk signal to cross from the SW corner to the NW corner of Atwater and Henderson is not turning on.
For several days, it has been impossible to activate the pedestrian walk signals for the crosswalk across 10th St on the west side of the 10th and Jordan intersection. After pressing the button on either side of the crosswalk, the Walk signal never activates through multiple cycles. The small red lights above the buttons remain illuminated.
Not the traffic light but the walk light. It seems for the last two days it has not change to allow people to (legally) cross the street. Sometimes the crossing light is set to a timed interval others its just the button request, but none of these things seem to be happening now. Pushing the button does not produce the "wait to cross...". Please look into this ASAP. Thank you.
Traffic signal not working properly at East 10th street and North Union. This signal is cycling through incorrectly and backing up eastbound traffic to Jordan Ave during peak times.
500 block W. Allen St. along side of former Mc Doel Baptist Church. 25 m.p.h. Speed limit sign taken down by contractor for AT&T installing utility pole is still on the the ground after several days.
The traffic light cycles left turn only arrows for north and south-bound Walnut every time regardless of cars at intersection or turning or not.
Patterson/Fairview traffic light timing is on the piss again
The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.
10th and Jordan intersection: Westbound pedestrian crossing button on SE corner and northbound crossing button on SW corner are not working - red light above button remains on and walk signal is not activated. Problem has been happening for at least a week or so.