The light at High St and Hillside/Moores Pike has a left turn signal that is activating whether or not a car is present. It is the left turn arrow on southbound High St as you approach the intersection adjacent to the cemetery. This prevents cars heading north on High St from proceeding until the light cycles through the phantom left-hand arrow.
Graham at Rockport. On the east side, one of the light bars for the flashing beacons is hanging off the pole by the wires and needs to be reattached. Thanks!
The traffic cycles were not functioning properly at approx. 5:10pm, which caused traffic delays in all directions. No green light was given for eastbound 10th St. traffic for several minutes even though the left-turn arrow cycled properly.
People are reporting Walnut/Hillside signal stays green for Walnut for very long times, backing up Hillside Drive until someone turns right on red illegally, which seems to trigger the signal. Is this City or State problem?
A tree branch is obscuring the yellow turn arrow on a traffic signal at 2nd and High. The traffic signal is for westbound traffic on 2nd Street. The signal itself is located on the western side of the intersection and is the southern (left when looking at the lights as traffic would) signal hanging there. It should be trimmed up.
The stop light at E. 3rd St and Smith Rd. takes forever to change now and it didn't used to. The traffic gets very backed up on Smith Rd.
signal stops 3rd st. traffic and backs up traffic even when no traffic is on Woodscrest.
Pedestrians should not have to push a button to get a walk signal on the east side of the intersection. Coming from campus we can’t see whether the light is green for Woodlawn traffic and people often assume someone else has already pushed the button, then people dart across hoping they have time, not wanting to wait through a whole other light cycle. There is no downside to an automatic walk signal on the east side of the intersection.
Turn signal bulb for west bound traffic on 3rd is out
The southbound turn arrow on westbound 3rd street is not functioning.