Traffic signal at the intersection of E 17th Street and N Woodlawn Ave changes to red for 17th street vehicles although no vehicles are on Woodlawn Ave to activate their light to green. This is backing traffic up 17th Street in the mornings.
The new pedestrian crossing signal at 11th and Diamond has a locator tone that beeps continuously 24/7, all day and all night. The signal is very close to my house (<10ft) and I can hear the tone from inside my walls, which is absolutely maddening when I'm trying to fall asleep! Please turn off the persistent locator tone on these signs, there are other tactile cues to help those with impaired vision find the crosswalk. Thanks!
The walk signal at the NW corner of 10th and Walnut facing south is burnt out. The don't walk signal lights up but the walk does not. Thanks!
It seems that the timing of the traffic lights on College through downtown needs to be re-set or something. I drive that route 4 mornings a week at about 5:45 am and typically I will stop at a light at either 10th or 11th and from then on it's smooth sailing. Starting last week, the timing was off, and since then I've had to stop at as many as 5 intersections between 11th and 1st Streets. Just wanted to let you know! :) Thanks!
The pedestrian signal on the northwest corner at the intersection of College and Kirkwoid does not show the white ok to cross figure when approaching from the east. I noticed this last weekend but forgot to report.
The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.
10th and Jordan intersection: Westbound pedestrian crossing button on SE corner and northbound crossing button on SW corner are not working - red light above button remains on and walk signal is not activated. Problem has been happening for at least a week or so.
The vehicle sensors on Clarizz don't seem to be detecting correctly. I have set at that intersection, and the traffic signals take a long time to change, even if there's no traffic on 3rd Street. Wasn't sure if that is the way it is supposed to be or not.
Left turn arrow for 7th onto college does not work. Waited two green light cycles and never got a green arrow.