The left turn arrow for westbound Winslow Rd at South Walnut cycles green every time when there are no cars turning left. Don't believe the loops were reactivated after construction this summer.
The light at High St and Hillside/Moores Pike has a left turn signal that is activating whether or not a car is present. It is the left turn arrow on southbound High St as you approach the intersection adjacent to the cemetery. This prevents cars heading north on High St from proceeding until the light cycles through the phantom left-hand arrow.
Signal needs reset/repaired, it is flashing red in all directions
Traffic signal flashing red all directions.
The light at Walnut and Kirkwood is mistimed for northbound traffic on Walnut. Instead of waiting at one light and then getting green lights for the rest of the lights on Walnut, traffic has to stop at Kirkwood and again at 6th Street.
The "walk" signals for crossing Third Street at High and Bryan Avenues never gave us the walk signal despite having pressed the pedestrian crossing buttons several times, and sitting through several cycles of the stoplight(s). This was both crossing Third Street heading north onto Bryan, as well as crossing Third Street south onto High.
The traffic signal on E. 3rd St. at third and high the arrow for turning left onto high street isn’t working properly.
Turn signal bulb for west bound traffic on 3rd is out
The traffic light on E 3rd St and High St facing East (for people driving west on 3rd St) has the left turn arrow signal out
Left turn arrow for both Ebound & Wbound activates when no cars are in turn lanes. Everyone stationary for 20-30 seconds.