Not the traffic light but the walk light. It seems for the last two days it has not change to allow people to (legally) cross the street. Sometimes the crossing light is set to a timed interval others its just the button request, but none of these things seem to be happening now. Pushing the button does not produce the "wait to cross...". Please look into this ASAP. Thank you.
the traffic light at the 45/46 bypass and walnut street is malfunctioning. It only stays green for about 13 seconds for the east and west traffic on 46 and is causing large backups in the morning and afternoon. This seems to happen after the football games. Please take care of this issue and let traffic flow. It is to the point where the light at kinser pike turns green but there is no where to go because this light is backed up so badly.
Northbound Rogers does not get green light if the left arrow is triggered.
Northbound Rogers does not get green light if the left arrow is triggered.
Patterson traffic light to turn onto 3rd Street West is red far too long
The street sign at the intersection of East Stephens and Deckard is both bent in half and tilted upward, making it incredibly difficult to read.
The stop sign is blocked at the intersection of Ross Lane and Timothy Drive (just off West Allen Street). A tree is growing a few feet in front of the sign, and completely hides the stop sign.
It appears the turn arrow for the west bound lane of 10th street at Jordan Ave is not working
One of the pedestrian crosswalk signs is not functioning at the corner of Indiana Avenue & East Third Street.
I often bike north on Jordan avenue to 3rd St., then turn left onto 3rd with the traffic light. Before the recent construction, the left turn signal appeared to be on a timer, and now it seems to be activated by a metal-sensitive loop in the pavement. But so far I have been unable to trigger the left turn signal with my bicycle. I have been instructed to ride exactly on the wire, and I ride a steel frame bike from 1970, so it should have plenty of metal to be detected. Is there some way to make sure this traffic light actuator is sensitive enough to work for bicyclists as well as for cars?