closed #185504
Biking & Walking
3417 E 3rd ST
- Case Date:
- 9/9/2023
The pedestrian light to cross third street often doesn't work and it becomes impossible to cross the street at the intersection.
The pedestrian light to cross third street often doesn't work and it becomes impossible to cross the street at the intersection.
Park Ridge neighborhood: Partnered with the traffic calming bumps are stakes with reflectors to bring driver's attention to the speed bumps. Nearly all of the stakes are missing the reflectors or the reflectors are damaged. Some of the pairs of stakes have one of the stakes missing like in front of my house. (A lawn service damaged it and removed it). So please survey and replace the missing reflectors and a couple of the missing stakes. The stakes with no reflectors appear dangerous. Like "Games of Thrones" dangerous. It was odd at the conclusion of the 2022 Morningside repaving, that the new version of traffic calming bumps was installed (thanks), but the stakes were ignored in terms of reflectors. We appreciate your attention on this item.
In front of 112 Glenwood West - post with deflectors marking west side of traffic calming bump - post is down and needs to be replanted. Post is lying beside road at spot where it belongs. Thanks -
hole needs filled in asphalt at intersection of Morningside Drive and Park Lane.
Street repaving request for East Longview Ave. Looking for the 2024 paving schedule, may not be released yet. East Longview needs paving through its full length within Park Ridge, from N. Glenwood West through to N. Glenwood east cross streets. This would accomplish: -Repaving needed overall - Install updated traffic calming bump design replacing current full width bumps. -Stripe the bike path lane stripe as it's part of the E-W bike greenway. And thanks! for placing the stop stripes at the 4-way stop E. Longview and N. Glenwood west by the park. We have a significant issue with motorists running that stop sign by the park entering the neighboorhood. We appreciate your good work.
Hello Joe and Street Dept. staff. We sure appreciate you adding the new strips to the speed bumps on E. Longview Ave. Unfortunately one and maybe a second have come unglued. Sorry to see it and wanted to inform you ASAP. Thanks again for the action! Steve Akers
stop sign bent over from accident at e 3rd and morningside drive
Street light does not work anymore.
street light isn’t working very well. not illuminating the street below.
It seems like something has changed with the signal at Third and Smith. If you were on Smith, the light would change soon after you came to a stop especially when there’s little traffic (early morning for example). Now, it takes several minutes for the light to change and allow the Smith Road traffic to go even in light traffic times. This causes Smith Road to be even more backed up than usual. Wanted to see if ot could be set like it used to be. Thanks!