Graham at Rockport. On the east side, one of the light bars for the flashing beacons is hanging off the pole by the wires and needs to be reattached. Thanks!
A tree branch is obscuring the yellow turn arrow on a traffic signal at 2nd and High. The traffic signal is for westbound traffic on 2nd Street. The signal itself is located on the western side of the intersection and is the southern (left when looking at the lights as traffic would) signal hanging there. It should be trimmed up.
The stop light at E. 3rd St and Smith Rd. takes forever to change now and it didn't used to. The traffic gets very backed up on Smith Rd.
signal stops 3rd st. traffic and backs up traffic even when no traffic is on Woodscrest.
Pedestrians should not have to push a button to get a walk signal on the east side of the intersection. Coming from campus we can’t see whether the light is green for Woodlawn traffic and people often assume someone else has already pushed the button, then people dart across hoping they have time, not wanting to wait through a whole other light cycle. There is no downside to an automatic walk signal on the east side of the intersection.
Turn signal bulb for west bound traffic on 3rd is out
The southbound turn arrow on westbound 3rd street is not functioning.
Driver reported that the left turn lane arrow was not working properly, stuck on red.
The walk signals do not come up anymore. It is a constant red hand and there are no buttons to select a walk signal. Many pedestrians use this intersection and not having a clear signal to alert drivers is creating a dangerous condition.
The light on Walnut heading north at 1st Street has been functioning differently for a while now than it used to. It used to be that when the crosswalk signal for northbound pedestrians hit zero the light turned yellow. Now, the light stays green for a long time after that. The light on 1st Street is red way too long. The traffic on Walnut has a green light and starts to back up at 2nd because the Walnut light at 2nd is red from the prior cycle still. Can someone look at this and see if that Walnut light at 1st can be fixed so it is not holding on green for so long?