The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.
the traffic light at the 45/46 bypass and walnut street is malfunctioning. It only stays green for about 13 seconds for the east and west traffic on 46 and is causing large backups in the morning and afternoon. This seems to happen after the football games. Please take care of this issue and let traffic flow. It is to the point where the light at kinser pike turns green but there is no where to go because this light is backed up so badly.
10th and Jordan intersection: Westbound pedestrian crossing button on SE corner and northbound crossing button on SW corner are not working - red light above button remains on and walk signal is not activated. Problem has been happening for at least a week or so.
At SR46 and 10th St. While a train is crossing SR46 I saw two disfunctional aspects of the signaling. 1) The pedestrian crossing requests are totally ignored while the train is crossing SR46. Pedestrian signals stayed red until the train had finished crossing SR46. 2) Eastbound 10th never was given a green signal while the train was crossing SR46. There is no reason that this direction should be kept from crossing and several cars ended up crossing against a red light during the green signal for westbound 10th.
We were traveling east on 10th St. this evening, approaching the bypass on the east side. While waiting for the red light to change to green, the train gate on the bypass lowered and a train approached also from the east. When a train is crossing the bypass, the light rightly does not allow traffic through from the north, as it would soon have nowhere to go. This is good. BUT it also did not allow our lane to travel through the intersection going east! I know there is no separate right-turn signal there to stop people from turning south onto the bypass, but it is not logical to stop all traffic going east as well. And besides, the light DOES allow westbound traffic on 10th Street to BOTH continue west AND turn south onto the bypass -- even though there is a separate signal there for the south-turn lane -- and those cars then are stopped by the crossing gate. This is really illogical, and should be remedied.
The audio indicators for blind people are not working on this intersection. A person who is blind tells me she has submitted this before and they fixed it, but it has gone out more than once and she's frustrated.
The light at Walnut and Kirkwood is mistimed for northbound traffic on Walnut. Instead of waiting at one light and then getting green lights for the rest of the lights on Walnut, traffic has to stop at Kirkwood and again at 6th Street.
The "walk" signals for crossing Third Street at High and Bryan Avenues never gave us the walk signal despite having pressed the pedestrian crossing buttons several times, and sitting through several cycles of the stoplight(s). This was both crossing Third Street heading north onto Bryan, as well as crossing Third Street south onto High.
The traffic light on E 3rd St and High St facing East (for people driving west on 3rd St) has the left turn arrow signal out