closed #155186
Sidewalk & Curb Complaints
526 N Lincoln ST
- Case Date:
- 8/25/2016
526 N Lincoln. I had a nasty trip on the uneven sidewalk in front of this address today. maybe this should be looked at?
526 N Lincoln. I had a nasty trip on the uneven sidewalk in front of this address today. maybe this should be looked at?
Street light out on Blair Avenue, next to our home at 915 N. Blair.
There has been a large dip in the concrete in this sidewalk for quite some time now. It is located right when you pull in off of Third Street into the alley between Baked Cookies and Sweet Claire's bakery. The sidewalk must have been unstable when it was poured and one section has sunk down about six inches, leaving a ledge between the two sections. Thanks for your attention to this concern.
There is a lot of sand that has collected on the corner of Grant and 10th. I would like to request a street sweeper to clean up the loose sand as it is causing issues for bike riders and motorcyclist. Most of the sand is right on the side of the Revolutionary Bike and Bean Building (Red Brick Building). Thank you.
large potholes in alley behind Topo's 403 at 403 N. Walnut.
Winding Way, Kingsley/Valleyview and a few spots on Briarcliff in Fritz Terrace need to be resurfaced. Might be easy to include in Kinser Pike resurfacing project currently. Specific pothole spots include: 1012 Winding Way, intersection of Winding Way and Stonycrest, 912,1141, 1132, 1122, 1112, 1102, 1031, 3351 Winding Way; 3401, 3431, 3451, 3501, 3501, 3521, 3621, 3711, 3232, 3212, 3101 Kingsley, Kingsley and Briarcliff, Kingsley and Meadow; 3402, 3342, 3332, 3311 Valleyview; and 1121 Briarcliff. Thank you!
A large pothole has formed as one turned off of 10th Street. The address it is located is 409 E 10th Street.
Stop sign needs to be replaced
The pedestrian crosswalk buttons are not working properly at the intersection of 10th & Jordan this morning. In particular, the westbound crossing button on the southeast corner did not activate the pedestrian crossing light through several cycles at approx. 9:10am. I didn't confirm, but it looked like other buttons/directions were having similar problems. Was working fine yesterday.
None of the pedestrian crossing buttons have been working at the intersection of 10th and Jordan today. There is no way to activate the pedestrian signals.