Case Date:

5/4/2020

Signal at intersection of N old SR 37 and N Walnut, which is part of the Cascades bike&ped path, does not ever give a 'walk' signal, even if the button is depressed. It just says out loud 'wait' and then doesn't ever show white/walk. The city's transportation plan says peds are the highest priority out of all transportation users, so consider making it good. The light should be in pedestrian recall mode, so that there is a 'walk' every phase whether someone touches the button or not. The default 'walk' should be long enough to cross that leg of the intersection. When the button is pressed, it should be the highest signal priority and car traffic should see an instantaneous yellow light, and then a red light should be displayed in both directions (all cars stop!) for long enough to cross both crossings (~150ft, so at *least* 60 seconds). There must be a 'no turn on red' for cars northbound on Walnut turning to east, because visibility there is poor. There should be a 'no turn on red' for cars westbound on old 37.

Case Date:

6/3/2020

The audio indicators for blind people are not working on this intersection. A person who is blind tells me she has submitted this before and they fixed it, but it has gone out more than once and she's frustrated.

Case Date:

6/29/2020

Left turn arrow on northbound Walnut at Hillside is cycling green for 30 seconds everytime, with no cars on the loop.

Case Date:

6/30/2020

Walnut southbound left turn arrow onto Grimes east cycles green every time and there's rarely a car turning left. Plus the northbound left turn arrow for Grimes/Patterson doesn't stay green long enough causing traffic to back up almost to Hillside at times.

Case Date:

7/5/2020

Cross walk signals for those walking never changes from red "stop - don't walk" light, even after pushing the button requesting a cross.

Case Date:

7/11/2020

A tree branch is obscuring the yellow turn arrow on a traffic signal at 2nd and High. The traffic signal is for westbound traffic on 2nd Street. The signal itself is located on the western side of the intersection and is the southern (left when looking at the lights as traffic would) signal hanging there. It should be trimmed up.

Case Date:

8/23/2020

Pedestrian sign outside Samira (northwest corner of 6th/Walnut) doesn't have functioning white bulbs, or, it is only displaying the countdown and "do not walk" signals and never the white walk signal. Thanks!

Case Date:

2/6/2021

Signal needs reset/repaired, it is flashing red in all directions

Case Date:

2/12/2021

Traffic signal flashing red all directions.

Case Date:

2/19/2021

The light at Walnut and Kirkwood is mistimed for northbound traffic on Walnut. Instead of waiting at one light and then getting green lights for the rest of the lights on Walnut, traffic has to stop at Kirkwood and again at 6th Street.