There is a pothole at the entrance by the sidewalk. The hole was made when the fiber wires were installed back in November. Never fixed. Vehicles scrap when they drove through it.
See case #201442 (https://bloomington.in.gov/crm/tickets/view?ticket_id=201442). Given that the fiber optic project is now "on hold" (= bankrupt?), can the City step in and correct some of the damage they caused? They drilled a hole in the SW part of the intersection of Dunn/12th. It is dangerous, since there are no sidewalks on Dunn and lots of people wander through this area at night on their way to and from The Standard" via the RR. Someone is going to get hurt if the hole is not filled soon or an animal might fall in, and since there appears to be a void beneath the street right at this location, a collapse could occur if a heavy vehicle were to drive directly over it.
Potholes/pavement disintegrating on Browning Lane at both the corners of Allendale and Browning Place. At Allendale it is remaining damage from the fiber optic digging where they had to go into the street and it and is filled with mud and water most of the time. Right now it is dry(ish!). Browning Place has been a longer term erosion. Thank you!!!
Uncovered borehole at the edge of the road. See the picture.
Hole made in street at easement to our driveway during cable work. This patch fell through. And hole if open. Picture won’t attach.
During the year, likely due to heavy construction equipment near my house the street to get to parking has become dilapidated. At this point whenever I pull into my driveway, the bottom of my car is hitting the ground and potentially being damaged.
Damage to our driveway due to cable installation with heavy trucks and digging in area. Can’t attach photo.
Fiber optic install hole opened up at NW corner 900 E Grimes Ln & 1200 S Woodlawn St. It's at least 1.5 foot deep.
On the south side of Allen St, between Walnut and Washington, someone cut a hole in the street and filled it with small rocks that are just spreading everywhere. They also upended the adjacent sidewalk panel and tried to just lay it back down again. Maybe the fiber company?
There is a large piece of metal at the intersection of 2nd and Rogers (presumably covering up a pothole or other road issue). However, it is in the line of traffic and creates an extremely loud noise every time a vehicle drives over it making it difficult for anyone living in the general vicinity to sleep. Perhaps a different methodology could be used until the necessary road repairs are completed?