Flooding down Brownridge is starting an erosion hole again the road side with a drop of about 3 ft. from the road bed. A short load of stone (2-3 yds maybe) added to the previous should solve it; the last treatment has remained stable and has worked well.
I don't have a current photo but particularly since the utility work completed on this stretch of road the parking spots in front of the shops flood and hold water. The gradient actually seems to slope away from the drain instead of towards. As a result, we frequently have to bail out the parking spots to make them usable for customers. Flooding issues include the accessible parking spot, which poses a risk to the mobility impaired. How can we best collaborate on a solution? Thanks!
Hello. There is a dual drainage grate system in the middle of Blair Ave just before W 12th Court heading North. It looks as if the grates are sinking and are going to fall into the hole under them. There is major damage and erosion of the structural integrity of the cement and asphalt surrounding the grates and across the entire street. There is exposed metal bars that drivers swerve to miss to protect their cars putting humans and parked vehicles at risk. Can you please help? Thank you for all that you do!
The ditch between my driveway and the adjoining driveway is clogged with dirt and debris that I want removed. I can do it, but I don't want to encroach on a neighbor's land or the City of Bloomington land without permission. the ditch is not on the pavement but may lie within the City's right-of-way, and I may need your permission or guidance to clear the drainage ditch and empty the culvert underneath my driveway. Is University Street an easement or a fee title? We also have a dead ash tree a yard from the pavement on the lot line, probably due to the Asian emerald ash borer, an invasive pest, and I have other live ash trees that I would protect. What are the rules for removing the hazard tree?
8" water valve cover popped off at Hillside & Dorchester. Eastbound lane of Hillside. Cover at base of stopsign/streetsign SE corner of intersection. This is the 3rd time I've reported this in just over a week (1st 2x's by phone). Why don't you replace with a cover that can be LOCKED DOWN to keep it in place?