closed #176752
Traffic Signals
- Case Date:
- 7/28/2021
Why haven’t the cross walks been installed at Hillside/Moore’s pk and High Street?
Why haven’t the cross walks been installed at Hillside/Moore’s pk and High Street?
About 5 minutes ago the traffic light was stuck on red in seemingly all 4 directions at the intersection of 17th and Madison/Kinser. One direction (east) may have had flashing red lights. We were all stuck for some time before people started going as if the lights were flashing red on all sides.
The traffic light at Bloomfield Rd (2nd Street) & Rolling Ridge Way is a problem during normal commuting hours (7:30am-8:30am & 4:30pm-5:30pm). In the morning, traffic comes to a crawl and is backed up from this intersection all the way to the exits of Highway 69, often blocking the Highway exits. The short trip between the Highway exits and this intersection would normally take less than 1 minute. During the morning commute hours, it takes 5+ minutes. A similar situation occurs in the evening. Westbound traffic comes to a crawl and is commonly backed up from this intersection to S Patterson Drive, or sometimes even farther. This traffic light is certainly the cause. After passing this light, the congestion is no where to be seen and traffic flows normally. My suggestion would be to alter the programming of this light, during these specific hours, to be much more heavily biased toward East-West traffic. Perhaps it could stay green for East-West traffic for 50% longer than standard, or similar.
Traffic signals are not working
The signal is letting 3 or 4 cars through and then changing to yellow. This is happening in all directions.
I don’t know how many times I’ve complained about this light. In the morning it backs up traffic to the interstate and in the evening it backs up to Landmark ave. It is not the result of Catalent traffic. The light cycles even if there is no cross traffic. When it does cycle it first lights the west bound turn light whether or not there is anyone in that lane. The local residents are beginning to believe this light is left broken as a form of punishment for opposing annexation
The green light bulb is out on the right traffic signal as seen when traveling southbound on Rockport Rd. at the intersection with Tapp Rd./Country Club Rd.
When you are driving on Patterson toward Rodgers St., the light at Fairview turns red when there is no one at the cross street, Fairview. You then have to wait for a delayed signal, then you get a green light. 3-4 cars can make it through the light, and it turns red again with no traffic on the cross St., Fairview. Patterson is the main street. Why is the light turning red with no one on Fairview, slowing up traffic ON Patterson? This has been going on for a month!!!
The light on Walnut heading north at 1st Street has been functioning differently for a while now than it used to. It used to be that when the crosswalk signal for northbound pedestrians hit zero the light turned yellow. Now, the light stays green for a long time after that. The light on 1st Street is red way too long. The traffic on Walnut has a green light and starts to back up at 2nd because the Walnut light at 2nd is red from the prior cycle still. Can someone look at this and see if that Walnut light at 1st can be fixed so it is not holding on green for so long?
The left turn signal for northbound traffic turning left onto westbound 10th St. is always activating, even when there is no car in the left turn lane.