Feerwood Ct and Ironwood Ct street signs are misprinted as Feerwood Dr and Ironwood Dr, and the Tulipwood Ct sign was not replaced when those signs were and has become difficult to read by comparison. This causes confusion for people not from the area who are unable to find the right street since the signs are wrong.
Shale Crest Dr. Street sign needs to be replaced
Stop sign is laying on the ground
Stop sign on Buick Cadillac Drive at Clarizz blocked by leaves/limbs.
The stop sign is partially covered by shrubs and they need to be trimmed. People run this stop sign all the time. Please make sure the stop sign is fully visible. On woodlawn headed NORTH at E Maxwell Lane and Woodlawn intersection.
The sign for "South Drive" at the intersection with Walnut has been hanging down, a bit askew, for a while. The sign is on the southwest side of the intersection, on the west side of the street light structure. You can still read it, but it is not properly attached.
Fairview school zone flashing lights not flashing (photo near 9th and rogers). Photo 3:28p today. Due to staggered times for rona mitigation, school dropoff at fairview elem is now nominally 8:35-8:55, and pickup is 3:20-3:40. Additionally, light should flash 15 minutes after pickup and 15 minutes before drop off because parents walking from/to school without their students still typically have student-siblings with them. Also, light should flash whenever there is an afterschool activity. I'm real disappointed this extremely ineffective-by-design approach was chosen instead of appropriately-engineered curb bumpouts! But if this is the bed we made, can we at least getsomeone lying in it when my kids are there.
There is a pedestrian cross-walk here, but traffic often does not stop, creating a safety hazard for pedestrians (who have the right of way). I think Kirkwood needs to have some traffic calming, and a stop sign would be one way to slow traffic and protect pedestrians.
Traffic light at high and hillside is not working. Light traveling south on high street is not working properly