Walk signal for pedestrians crossing aAtwater at Henderson is off and dangerous, restricting crossing when it should and encouraging crossing when it shouldn't. I've seen at least one close call. Please fix this! Thanks
I often bike north on Jordan avenue to 3rd St., then turn left onto 3rd with the traffic light. Before the recent construction, the left turn signal appeared to be on a timer, and now it seems to be activated by a metal-sensitive loop in the pavement. But so far I have been unable to trigger the left turn signal with my bicycle. I have been instructed to ride exactly on the wire, and I ride a steel frame bike from 1970, so it should have plenty of metal to be detected. Is there some way to make sure this traffic light actuator is sensitive enough to work for bicyclists as well as for cars?
Not really a "Traffic signal" but I couldn't find a "Sign" category: The "No Parking" sign in front of 1300 E. Southdowns Dr. was rammed and damaged by a fast-moving hit-and-run white panel truck at 2:30 pm today, 5/28/2014. Sign was bent and is now leaning. I heard the noise, saw the truck driving past, but did not notice identifying markings on the truck -- it may have been solid white. It had to be driving on the grass to do this damage.
Hi, I contacted the city last week about a stop sign on 2nd and Ballantine that is completely covered by a tree. It is a danger as it should be a 4 way stop, but people don't see it and will fly through it. Please get the tree trimmed so it doesn't cover up the stop sign. Thank you. Best, Ingrid
Pedestrian signal missing on the ne corner of Eagleson and Atwater crossing Eagleson
Pedestrian signal missing on the ne corner of Eagleson and Atwater crossing Eagleson
When heading N on Highland and turning L onto 3rd Street, it is extremely difficult to see around the TIS Bookstore. Cars with long noses practically have to inch out into traffic to see whether any vehicles are coming. (I suspect this may be partly responsible for the collision at the intersection I saw a few days ago.) My suggestion for a solution is to install convex traffic mirrors to increase visibility around the corner. These are used to excellent effect in the many tight corners in Europe, where streets and buildings often existed long before modern traffic conditions.
Dangerous Crossing of Third Street. Traffic on 3rd is going one-way west. Traffic on Henderson is going one-way north. Cars wishing to make a right on red often only look left (to spot oncoming traffic) and do not look right, where pedestrians are crossing with a little white man telling them it's safe to go. I have witnessed three very close calls where pedestrians trying to cross were almost hit by drivers making a right on red. The solution is to prohibit a right on red in this very heavily trafficked area. Please don't wait for someone to be actually hit to make this change. Thanks!
Traffic southbound on Jordan is always held up by people waiting for the left turn to go east on Atwater. Countless times I've seen that the light has already cycled to yellow by the time northbound traffic has cleared, and as a result cars have backed up all the way to third st. If the switching equipment allows jordan southbound to get green BEFORE jordan northbound, it will improve intersection throughput tremendously.
Corner of Dunn and 3rd street, need to place an additional "no turn on red sign" next to signal light. Many people turn right onto 3rd street from Dunn in front of on-coming traffic.