Case Date:

8/8/2023

A tree feel from 1307 E Davis Street across the street and is blocking an important drainage area across the street that is extremely important for the downhill run off.

Case Date:

11/23/2020

This morning (11/23/2020), I found a tire on the road in front of my property. I guess that someone hit the dry stone wall of my garden in the night because it is damaged or dropped off the tire. I am wondering whether you can remove it because it could be an obstacle for cars.

Case Date:

12/28/2013

Double yellow on Jordan north of Atwater very heavily worn.

Case Date:

5/23/2014

Corner of Dunn and 3rd street, need to place an additional "no turn on red sign" next to signal light. Many people turn right onto 3rd street from Dunn in front of on-coming traffic.

Case Date:

7/16/2018

Hi, I contacted the city last week about a stop sign on 2nd and Ballantine that is completely covered by a tree. It is a danger as it should be a 4 way stop, but people don't see it and will fly through it. Please get the tree trimmed so it doesn't cover up the stop sign. Thank you. Best, Ingrid

Case Date:

1/31/2018

Caller from The Project School reported that the lights at the crosswalk at the intersection of Smith & Washington aren't working. The lights don't flash to allow pedestrians (their students) to cross. Thanks for looking into this.

Case Date:

9/12/2016

Stop sign knocked down at se corner of Highland and 2nd St

Case Date:

4/28/2017

Missing street name signs, and knocked over school zone sign. The school sign I straightened as much as possible but it seems to be just stuck in a dirt hole. So leaned again right away.

Case Date:

5/29/2014

Not really a "Traffic signal" but I couldn't find a "Sign" category: The "No Parking" sign in front of 1300 E. Southdowns Dr. was rammed and damaged by a fast-moving hit-and-run white panel truck at 2:30 pm today, 5/28/2014. Sign was bent and is now leaning. I heard the noise, saw the truck driving past, but did not notice identifying markings on the truck -- it may have been solid white. It had to be driving on the grass to do this damage.

Case Date:

7/3/2015

I often bike north on Jordan avenue to 3rd St., then turn left onto 3rd with the traffic light. Before the recent construction, the left turn signal appeared to be on a timer, and now it seems to be activated by a metal-sensitive loop in the pavement. But so far I have been unable to trigger the left turn signal with my bicycle. I have been instructed to ride exactly on the wire, and I ride a steel frame bike from 1970, so it should have plenty of metal to be detected. Is there some way to make sure this traffic light actuator is sensitive enough to work for bicyclists as well as for cars?