During construction, there is not a safe way for pedestrians, joggers, wheelchairs, baby strollers and other non-vehicle movement through this blind road. Recommend routing traffic or reducing speeds to allow for people to safely get through this tight spot.
Intersection at Chambers Drive and South Rogers is often blocked for vehicles entering or exiting Chambers Drive. Please paint large X or similar pattern on pavement to keep this 3 way intersection clear.
I have spoken with Public Works and Planning & Transportation previously but i would like to put it out there again since there has been a lot more progress on Union at Crescent. I would like to put in a request that N.Oolitic Dr from the rear exit of Union at Crescent to W.11th St be rebuilt with widening and curb/sidewalk combos to full ROW width. In addition, i still request that the intersection at N.Oolitic and W.11th be turned into a 3-way stop (signs, not lights.) I truly appreciate serious consideration of these matters and I will work with the city in any way I can, within reason, with my adjacent property. Thank you.
Looked like E Morningside through Park Ridge is at 20 mph but Park Ridge East is at 25 mph. Can you make consistently 20 throughout? Thank you. Both remain residential areas, bike path, and such.
I live at the corner of S. Park Avenue and University Street. In the last two months, there have been at least 4 traffic accidents at the corner when someone does not stop. While the police were called for 2 of the accidents, the others did not involve the police (drove off or exchanged information). The police were called when the accidents were significant enough to require towing away one (or both) vehicles. I do not know that a four-way stop is the right solution to reduce this problem, but something should be done.
Hi, I was almost hit by another car from narrowed right lane after city done the s college mall rd/E Moores Pike project. Can you put up a clear sign telling the drivers "right lane must turn Right" from S sare rd to S college mall rd to avoid possible accident? Thanks
I don't think 10th really needs expanded but if you do that recommendation make sure a signal goes in at 10th and Smith. It's already dangerous there turning left from Smith. Right turners squeeze by and obstruct view. Left turn protections and flow needs improved both at 10th and Smith and Third and Smith
We just need to slow down the traffic into The Stands going towards the park. Can we get one of the speed measuring signs to let people know how fast they are actually going?
Very concerned about traffic along Rogers between the two roundabouts (High St and Sare Rd). Is often bumper-to-bumper around 5p and worried about kids/older people walking, especially coming out of The Stands or the Sherwood Oaks Church. Would traffic-calming devices be considered here? Or, minimally, signs to slow down traffic?
There is a very dangerous vehicular traffic pattern on S Woodlawn Ave between Sheridan Dr and E Hillside Dr, especially near the Grimes & Woodlawn and Weatherstone & Woodlawn intersections. There is a blind hill on Woodlawn that greatly decreases visibility for everyone. North @ south-bound vehicles on Woodlawn regularly break the speed limit by 20+ MPH and have even seen estimated speeds of 70+ mph. Sometimes vehicles "floor it" on Woodlawn southbound from Sheridan Ln stop sign. The city should consider installing a STOP sign on Woodlawn @ Grimes intersection to decrease the speed of North & South-bound traffic on Woodlawn Ave. The city should also consider additional signage to protect pedestrians who are crossing from Weatherstone Ln to Bryan Park. I have almost been hit there several times by speeding cars and trucks. This is a primary route for cyclists, pedestrians, commuting students, and dog-walkers. Pedestrians and cyclists crossing Woodlawn anywhere between Hillside and Sheridan Ave risk injury and death by vehicles speeding up and down the blind hill. If you have any questions, please feel free to contact me.