Traffic light issue at hillside and Henderson. Eastbound hillside left turn lane arrow always functions even if no vehicle is turning left. Results in westbound hillside traffic backing up especially during peak periods. Apparently that eastbound left turn lane sensor isn’t working properly.
The traffic light at the interse3ction of Covenanter and College Mall Road changes to red, in the early morning, for no reason and stays that way for at least 40 seconds. It causes traffic to back up unnecessarily.
Traffic light is operating from a timer, not traffic. I am experiencing this as the only car north/south in the mornings around 5:30a.m.; no cars east/west to trigger the signal
The traffic light at the intersection of Adams St and Bloomfield Rd/Second St. is improperly adjusted. There is very light traffic from Adams St, but the traffic signal is set as if Adams St had similar traffic as Second St/Bloomfield Rd. This problem causes needless traffic backups on Bloomfield Rd/Second St, resulting in increased pollution from vehicles sitting at the traffic signal when there is no traffic from Adams St. Please send someone to view activity at this location, and adjust the signal so that it changes only when there are vehicles waiting on Adams St.
Traffic light on IN 45/46 for this turning left onto E Matlock Rd is unattached from the cables holding it steady and not facing the traffic it is meant to direct.
A couple of times recently the light at sare rd/college mall has not detected my car in the east bound straight lane of sare rd. This appears to only happen at night. I usually end up there for a few cycles.
There is a metal post with a sign on the train tracks right at the intersection of Indiana Ave and 13th St that looks very frail. In the past wind advisory situations we have had in the city, anytime the wind hit the post, that post sounded as if the wind could dislodged it violently from the base and the sign at the top could fly off into near-by buildings, it even sounded horribly loud as the sign does not seem to be securely attached to the post. When that happened I called 9-1-1 to let them know and asked them to contact whoever is in charge of the tracks for them to look into that by securing that post. However, nothing happened. Tonight, with the tornado watch and the very strong winds we are having, it's the same situation with the post. Because of that, I called the Indiana Railroad Company's emergency number and they said they would email someone but that that would take some time and they were not sure they would get to it that night since they were also in tornado watch.
Light indicating left turn onto park square drive and going straight is split in half on 3rd.
It's my question is about the street lights again on West 3rd Street how the timing is definitely , off so 3:30 in the afternoon no rush hour also at 10:00 at night you'll stop for a light as soon as you go the next one turns red so you basically stop at every light and during rush hour this causes traffic to back up through the intersections even when the light turns again the intersections are still full cuz the timing's off. You see lots of people running lights just so they don't get stuck at the next lights
I sent this message on March 14. I did not include my email or other contact information. Can you tell me if this will be changed? I noticed it was closed and again we are all waiting for the light to change with no traffic coming and only 2-3 of us can get through before it turns yellow. Traffic light on Atwater and Indiana very long on the Indiana side almost two minutes. On Atwater going towards the east side the light stays green for a long time. Once the light on Indiana changes only about 3 cars can go before it turns red again.