Can you please look at the drainage on High Street in this area? The street is always covered in water with medium to heavy rains. It doesn't appear that there are enough drains on this area of the street. This has been a problem for years.
Water meter cover in the middle of the street needs replacing. It's broken and you could trip in it if you're not careful
In intersection of High St and E Maxwell Ave, there is a missing steel cover of a water access point. Has been missing for days. Creates a hole about 6" or 8" across. Hazardous.
The alley next to my house has a deep ditch from water runoff. Hoping you can come and level it off, so my car doesn't get damaged. It's at the entrance to the alley, 516 S. Highland Ave. Thank you!
The South Arbutus Drive cul-de-sac needs repaving. The pavement is eroding away in several places, the north side of the green space in the middle of the cul-de-sac has become a pothole, and previous repairs/upgrades to water and gas lines have left the street in bad shape.
I reported this issue back in April. No one has touched it. There is a massive track about a foot deep right off the edge of the road. It is constantly full of mud and water that worsens every time it rains. Please take care of this before winter!!
Hole opened up on street. May be related to water main replacement
In reference to the entire bay of E Linden Hill Drive. The street paving is in disrepair due to years of wear and several water main breaks. Patch fixes have been done in past but full repair of this street. Request place to know when the street will receive a new hardtop covering as the adjacent street (The Stands Dr) did in recent years?
In February a water main burst and was promptly repaired. The hole has been filled but complete resurfacing has not been done. When can residents expect this to be completed? Thank you.
8" water valve cover popped off at Hillside & Dorchester. Eastbound lane of Hillside. Cover at base of stopsign/streetsign SE corner of intersection. This is the 3rd time I've reported this in just over a week (1st 2x's by phone). Why don't you replace with a cover that can be LOCKED DOWN to keep it in place?